Hear every seat in the bigger room.
AnyCo M1 extends the pickup of the AnyCo V8 video bar to the far end of a medium or large meeting table. Four omnidirectional mics capture voices 360° up to 5m away, with echo cancellation and noise suppression.
AnyCo M1
Know what connects where.
Connection overview. Check the requirements below for the exact ports, cable type and supported operating mode.
Extend the V8’s reach
Place M1 on the table to capture participants the video bar’s own microphones can’t reach clearly.
Clear voices, less noise
Acoustic echo cancellation, automatic noise suppression and automatic gain control keep speech natural.
Chain for large rooms
Connect up to three M1 units in a daisy chain with mini-USB; each is powered by the video bar.
Make sure it fits your setup.
Works with AnyCo V8 only
M1 is an accessory for the AnyCo V8 video bar and does not work on its own or with other bars.
Cable routing
Plan cable runs between the bar and each microphone along the table.
Room size
Use one M1 for medium rooms; chain two or three for large rooms.
From unboxing to connected.
Place the mic
Put M1 at the far end of the table.
Connect to V8
Mini-USB from the V8 to the M1 ‘Previous’ port.
Chain if needed
Next M1 to the ‘Next’ port, up to 3 units.
Start the meeting
The V8 powers and mixes the mics automatically.
AnyCo M1 at a glance.
| Model | AnyCo M1 |
|---|---|
| Compatible with | AnyCo V8 video bar |
| Microphones | 4× omnidirectional MEMS, 360° |
| Pickup range | 3–5m |
| Audio processing | AEC, ANS, AGC |
| Ports | Mini-USB previous / next |
| Daisy chain | Up to 3 units |
| Power | From the video bar; 1.5W max |
| Size | Ø100 × 21.5mm |
| Weight | 0.29kg |
A little clarity before you buy.
Does it need drivers?
No. It connects to the AnyCo V8, which is plug-and-play over USB.
How many can I connect?
Up to three M1 microphones in a daisy chain.
Does it work with other video bars?
No, it is designed for the AnyCo V8.
